Instrumentation Manifold Valves
- 2 VALVE MANIFOLD SEPARATELY MOUNTED TYPE
- 2 VALVE MANIFOLD T TYPE
- 3 VALVE MANIFOLD 'H' TYPE
- 3 VALVE MANIFOLD 'T' TYPE
- 3 VALVE MANIFOLD SEPARATELY MOUNTED TYPE
- 5 VALVE MANIFOLD 'H' TYPE & 'T' TYPE
- 5 VALVE MANIFOLD BAR TYPE & SEPARATELY MOUNTED TYPE
2 VALVE MANIFOLD SEPARATELY MOUNTED TYPE
2 VALVE MANIFOLD SEPARATELY MOUNTED TYPE
2 VALVE MANIFOLD BAR TYPE
NOTE :
1. Working Pressure 10000 psi at room temp.
2. BOM applicable for SS316 body material.
3. All dimensions are in mm unless specified
1. Working Pressure 10000 psi at room temp.
2. BOM applicable for SS316 body material.
3. All dimensions are in mm unless specified
2 VALVE MANIFOLD T TYPE
2 VALVE MANIFOLD T TYPE
2 WAY GAUGE VALVE(BLOCK AND BLEED VALVE)
3 VALVE MANIFOLD 'H' TYPE
3 VALVE MANIFOLD 'H' TYPE
3 VALVE MANIFOLD 'H' TYPE
3 VALVE MANIFOLD 'T' TYPE
3 VALVE MANIFOLD 'T' TYPE
3 VALVE MANIFOLD 'T' TYPE WITH DRAIN
3 VALVE MANIFOLD SEPARATELY MOUNTED TYPE
3 VALVE MANIFOLD SEPERATELYMOUNTED TYPE
3 VALVE MANIFOLD SEPARATELY MOUNTED TYPE WITH DRAIN
Condensate is steam that has been condensed back into water. Condensate should not be confused with demineralized, de-ionized, make up, or softened water. When the condensate enters the boiler feed pump additionalchemicals are added and the product is now called boiler feed water.
- Use as liquid or condensate traps, seal pots, vapor chambers and knockout pots.
- All connectors are furnished with plstic plugs.
- Chambers are made from seamless carbon steel pipe and weld caps. All pipe connections are 3000# half-couplings mounted on 90 Degree angle. Extra connections can be furnished upon customer request.
- Heat code traceability
- All welding as per ASME SEC. IX
- All butweld joints will be 100% radiographed and
fillet weld will be D.P. tested. - All material will have mother test certificates.
- All condensate pot will be hot dep galvanised.
- All threads will be protected with dead plugs / plastic caps.
- Piping code compliance ASME B31.1 and PED category I, Module – A.
- Size : pipe size 2″,3″,4″ and larger size upon request.
- Length : Pipe length 8″,10″,12″ and larger length
- Working pressure : 6000 Psig (413 Bar)
- Material of construction : SS 316, SS 304, C.S., ASTM A 106 Gr B
- Pipe Schedule : 40, 80, 160, XX seamless pipe.
- Chamber as per ISA RP3
- NPT as per ANSI B2.1 taper pipe thread 1/2″ furnished.
- Socketweld as per ANSI B16.11
- Buttweld as per ANSI B16.9
- All chamber are 100% Factory tested prior to shipment.
Refineries, liquid patroleum gas processing plant, petro-chemical plants, systems difficult to shur off due to solid contents dust, rust, dirt etc.
Hydrostatic shell test is performed at 1.5 times the working pressure.
5 VALVE MANIFOLD 'H' TYPE & 'T' TYPE
5 VALVE MOUNTED 'H' TYPE
5 VALVE MANIFOLD 'T' TYPE
NOTE :
1. Working Pressure 10000 psi at room temp.
2. BOM applicable for SS316 body material.
3. All dimensions are in mm unless specified
1. Working Pressure 10000 psi at room temp.
2. BOM applicable for SS316 body material.
3. All dimensions are in mm unless specified
5 VALVE MANIFOLD BAR TYPE & SEPARATELY MOUNTED TYPE
5 VALVE MOUNTED BAR TYPE
5 VALVE MANIFOLD SEPARATELY MOUNTED TYPE
NOTE :
1. Working Pressure 10000 psi at room temp.
2. BOM applicable for SS316 body material.
3. All dimensions are in mm unless specified.
