Fit-tech Engineering

  • +91 9822194752
  • sales@fittechengg.com
Menu

Hydraulic High Pressure Hoses, Teflon (PTFE) Hoses and SS Corrugated Hoses

Medium Pressure C1TH (G1H) High Temp 1-Wire Braid Hose SAE 100R1 Type AT

Recommended For :

Medium pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R1 Type AT. Provides tighter than standard minimum bend radius and greater flexibility for easier plumbing.

Tube :

Black, oil-resistant synthetic rubber (Nitrile).

Reinforcement :

One braid of high-tensile steel wire.

Cover :

Black, oil and abrasion-resistant synthetic rubber (Hypalon).

Temperature Range :

-40°C to +135°C constant and +149°C intermittent (upto 10% of operating time). For water emulsions, etc.,

High Pressure C2AT (G2) Two Wire Braid Hose – SAE 100R2 Type AT

Recommended For :

High pressure hydraulic oil lines. Meets or exceeds the requirements of SAE 100R2 Type AT and performance requirement of DIN 20022 2SN / EN 853 2SN. Provides tighter than standard minimum bend radius and greater flexibility for easier plumbing. Suitable for use with non-skive ferrules.

Tube :

Oil resistant synthetic rubber (Nitrile).

Reinforcement :

Two braids of high-tensile steel wire.

Cover :

Oil and abrasion resistant thin synthetic rubber (Modified Nitrile).

Temperature Range :

For Hydraulic Oil Lines -40°C to +100°C. For water emulsions, etc.,

Medium Pressure C6 One Fiber Braid Hose – SAE 100R6

Recommended For :

Hydraulic oil lines, heavy-duty transmission oil, and anti-freeze solutions. Meets or exceeds requirements of SAE 100R6 / EN 854.

Tube :

Specially compounded, oil-resistant, synthetic rubber (Nitrile).

Reinforcement :

One braid of high tenacity synthetic textile yarn.

Cover :

Oil and abrasion resistant synthetic rubber. (Modified Nitrile)-Black.

Temperature Range :

For Hydraulic Oil Lines -40°C to +100°C. For water emulsions, etc.

Extremely High Pressure Coal Power/Longwall Mine Hose CPS Coal Power 4 & 6 Spiral Wire

Recommended For :

High pressure lines for water emulsion or petroleum-based fluids are found in roof support systems and longwall mining equipment.

Tube :

Black, oil-resistant synthetic rubber. (Neoprene)

Reinforcement :

Four layers of alternated, spiraled High tensile steel wire over a layer of fabric on 3/4” and 1” size; six layers of alternated spiraled, high tensile steel wire over a layer of fabric on 1¼”, 1 ½” and 2” sizes.

Cover :

Neoprene is a black, abrasion- and oil-resistant synthetic rubber. Layline stripe in yellow color. An abrasion-resistant MegaTuff® cover is also an option.

Temperature Range :

-40ºC + 121ºC

PTFE Hose with stainless Steel Braid(SmoothBore)

Smoothbore hose comprises a straight PTFE tube liner and a stainless steel outer braid and is the basic PTFE hose design being used successfully in many automotive and general-purpose applications. Fit-Tech Engg supply a range of sizes and options, including plastic or rubber outer covers over the braid. Other applications include use with high-pressure steam and gases, refrigerants, hot oils, and other hot or corrosive fluids.

PTFE Hose with stainless Steel Braid(Convoluted)

Convoluted PTFE hoses offer a non-stick, helically-shaped inner
core which minimizes pressure drops and simplifies cleaning. These flexible
hoses are designed to transport almost all substances and to withstand the most
demanding conditions, including high velocity and pressure surges. The standard
PTFE inner core can be replaced with an optional black non-conductive liner.

Stainless Steel Braid

Under pressure, unbraided corrugated hoses have a tendency to lengthen. An exterior layer of stainless steel wire braiding is added to the hose to prevent this. Braiding stops corrugated hose from expanding longitudinally, which multiplies the hose’s internal pressure strength. Braiding precisely mimics the hose’s movements and is incredibly flexible. Two or even three layers of braiding are offered to raise the pressure ratings even further. Braiding made of AISI 304 high-tensile stainless steel wire will be provided unless otherwise requested. If bulk requirements are met, braiding can also be supplied in copper, tinned copper, or stainless steel AISI 316.

End Connector

Standard procedures for *Teflon and annular corrugated S.S. Hose The fittings come in the following materials: brass, gunmetal, rolled bronze, mild steel, carbon steel, and stainless steel. Flange connection using floating and permanent flanges in accordance with customer specifications or to fulfill IS, DIN, and ANSI* ASA standards.

01 welding end

02 Pipe

03 hexagon nipple tapered male

04 hexagon nipple straight male

05 plain socket straight female

06 hexagon socket female

07 female swivel

08 hexagonunion straight female

09 hexagonunion straight male

10 hexagon union welding end

11 hexagon union straight female

12 stainless steel hexagon union straight female

13 hexagon union GF 304 type straight female

14 3000 lbs heavy duty type straight female

15 fixed flange

16 floating flange

Camlock Couplings

Quick connecting couplings conserve energy and are easy to connect / disconnect without the use of hand tools, for thousands of purposes where products are transfered by pipe or hoses, like Brewing, Chemical, Mining, Fertilizer, Petroleum, Steel Plants, Atomic Energy, Power Plant and Pneumatic Tools.

Stainless Steel Hoses

Flexible corrugated stainless steel hoses range in size from 6 mm (1/4”) to 300 mm (12”). The assembly’s pressure-tight core and flexibility are provided by the annular corrugated hose body.

Lance Hoses

These degreased and ultrasonically cleaned hoses are vacuum-proof, pressure-sealed, and work with or without an internal interlocking liner.

Advantages of Flexible Metal Hose

  • Suitable for wide temperature range (-270°C to700°C)
  • Compensates for thermal expansion contraction in the piping system.
  • High physical strength.
  • Fire resistant.
  • High physical strength.
  • Moisture resistant.
  • Longer life.
  • Good corrosion characteristics.
  • Connects misaligned rigid piping absorbs or dampens vibration and similar equipments.
  • A flexible and quick option for rigid piping in difficult locations.

Stainless Steel Hose Assemblies

Hose assemblies have flawless engineering in terms of strength, flexibility, and dependability. Businesses can offer a corrugated stainless steel hose assembly that satisfies even the most exacting technical requirements. We can provide the hose in a variety of materials, complete with any kind of end connections. The hose is tig welded to the end connectors.

HOSE ASSEMBLIES CAN BE SUPPLIED UNDER ANY THIRD PARTY INSPECTION.

Enquire Now
Enquire Now
Scroll to Top