Instrumentation Hardware


Condensate Pot

Condensate is steam that has been condensed back into water. Condensate should not be confused with demineralized, de-ionized, make up, or softened water. When the condensate enters the boiler feed pump additionalchemicals are added and the product is now called boiler feed water.


• Use as liquid or condensate traps, seal pots, vapor chambers and knockout pots.
• All connectors are furnished with plstic plugs.
• Chambers are made from seamless carbon steel pipe and weld caps. All pipe connections are   3000# half-couplings mounted on 90 Degree angle. Extra connections can be furnished upon   customer request.
• Heat code traceability
• All welding as per ASME SEC. IX
• All butweld joints will be 100% radiographed and
• fillet weld will be D.P. tested.
• All material will have mother test certificates.
• All condensate pot will be hot dep galvanised.
• All threads will be protected with dead plugs / plastic caps.
• Piping code compliance ASME B31.1 and PED category I, Module - A.


• Size : pipe size 2",3",4" and larger size upon request.
• Length : Pipe length 8",10",12" and larger length upon request.
• Working pressure : 6000 Psig (413 Bar)
• Material of construction : SS 316, SS 304, C.S., ASTM A 106 Gr B
• Pipe Schedule : 40, 80, 160, XX seamless pipe.
• Chamber as per ISA RP3
• NPT as per ANSI B2.1 taper pipe thread 1/2" furnished.
• Socketweld as per ANSI B16.11
• Buttweld as per ANSI B16.9
• All chamber are 100% Factory tested prior to shipment.


• Refineries, liquid patroleum gas processing plant, petro-chemical plants, systems difficult to    shur off due to solid contents dust, rust, dirt etc.


• Hydrostatic shell test is performed at 1.5 times the working pressure.